Embedded Files
The Micro Dipoles are specifically designed for the backpackers. Very light and compact.
15 Meter Micro Dipole
If you order an antenna and would like a balun installed on your new antenna,
we can do that for your at no extra LABOR charge.
With QRP / LOW POWER becoming more popular, we have added some nice, small, and compact antennas to our line. They are only rated at 150 watts, not 1500 watts. The standard models are made with the use of 16 gauge insulated wire. Like all of our Hy Power Antennas, we still use all the Hy Quality parts. We use stainless steel electrical hardware, SO-239 on the center insulator and two end insulators are included. All antennas are completely assembled and ready to install.
The 40 Meter Off Center Fed Antenna (OCF40Q) is a great multi-band antenna. It is a heavy duty QRP/Low Power antenna that uses #14 wire instead of the usual #16 wire used by our other QRP/Low power models. This antenna uses a 4 to 1 Guanella Current Balun that is rated at 250 watts, all stainless steel hardware, and covers the following ham bands: 2, 6, 10, 20, and 40 meters. The overall length of the antenna is 66 feet, one leg is 23 feet long and the other leg is 43 feet long. The feed of this antenna is placed 1/3 of the way in from one of the end insulators which would place the balun 23 feet in from the one end.
The 80 Meter Off Center Fed Antenna (OCF80Q) is also a great multi-band antenna. It is a heavy duty QRP/Low Power antenna that uses #14 wire instead of the usual #16 wire used by our other QRP/Low power models. This antenna also uses a 4 to 1 Guanella Current Balun this is rated at 250 watts, all stainless steel hardware, and covers the following ham bands: 6, 10, 12, 17, 20, 40, and 80 meters. The overall length of the antenna is 134 feet, one leg is 44.5 feet long and the other leg is 88 feet long. The feed of this antenna is placed 1/3 of the way in from one of the end insulators which would place the balun 44.5 feet in from the one end.
For more information on Off Center Fed Antennas, go to Off Center Fed Antennas
Off Center Fed Antennas
4:1 Guanella Current baluns are installed on all OCF antennas.
OCF40Q
This is the most highly recommended antenna to be used for portable QRP and low power operating.
It also works well as a stealth type antenna for the primary station.
Five bands with only one coax connection.
Micro Series OCF40QM
Band coverage: 2, 6, 10, 20, and 40 meters.
The “Micro Series” Off Center Fed antenna is made using #18 stranded insulated wire and a BNC to connect your coaxial cable. The GU4-HF-250-M balun, used on this antenna, uses the same cores that are used in the standard QRP OCF baluns. The balun enclosure is much smaller, 3" x 2" x 1". The end insulators are made from 3/8"round fiberglass. This antenna is not meant to be used for a permanent installation. It is designed for hams on the go. Backpackers love this antenna due to its compact size and weight. They can handle up to 250 watts.
The “Micro Series” Off Center Fed antenna is made using #18 stranded insulated wire and a BNC to connect your coaxial cable. The GU4-HF-250-M balun, used on this antenna, uses the same cores that are used in the standard QRP OCF baluns. The balun enclosure is much smaller, 3" x 2" x 1". The end insulators are made from 3/8"round fiberglass. This antenna is not meant to be used for a permanent installation. It is designed for hams on the go. Backpackers love this antenna due to its compact size and weight. They can handle up to 250 watts.
Full Size Dipoles
Baluns are optional.
If you order an antenna and would like a balun installed on your new antenna,
we can do that for your at no extra LABOR charge.
Baluns keep the RF off of the outside shield of the coax and puts it on the antenna, where it belongs!
Shortened Dipoles
Baluns are optional.
Multi-Band Dipoles
Baluns are optional.
Picture of LD2020Q (shortened 20 meter QRP antenna)
BL-HF-250 QRP Balun
MFJ 9020 and LD2012Q in action on You Tube: You Tube Video #1
Icom IC 703 and the 2B2040LQ in action on You Tube: You Tube Video #2
Full Size Micro Series Dipoles
Full Size Micro Series Dipoles
The Backpacker's Dream Antenna
Baluns are optional.
FSDP15QM with BNC for coax
FSDP15QM with BNC for coax
The “Micro Series” antennas are made using #18 stranded insulated wire. The center connection is a banana jack to BNC adaptor and the end insulators are made from 3/8" round fiberglass.
The “Micro Series” antennas are made using #18 stranded insulated wire. The center connection is a banana jack to BNC adaptor and the end insulators are made from 3/8" round fiberglass.
These antennas are not meant to be used in a permanent installation. They are designed for hams on the go. Backpackers love these antennas due to their compact size and weight. They can easily handle up to 400 watts.
These antennas are not meant to be used in a permanent installation. They are designed for hams on the go. Backpackers love these antennas due to their compact size and weight. They can easily handle up to 400 watts.
Any of these antennas can be fed using up to 35 feet of RG-174 coax. You can use a long run of RG 174 if you choose, but the losses get much higher. RG-174 will easily handle 100 watts.
Any of these antennas can be fed using up to 35 feet of RG-174 coax. You can use a long run of RG 174 if you choose, but the losses get much higher. RG-174 will easily handle 100 watts.
FSDP15QM shown with the "OPTIONAL" BL-HF-250-M balun
Click here for the order form: Order Form
Return to TOP
Page updated
Google Sites
Report abuse